Mounting instructions

LILLE BUD

play shop

Made in Germany

⚠️ ATTENTION!

All wall/play films are suitable for children aged 3 and over and for indoor use only. If you do not apply the film immediately, please keep it out of the reach of children. It may only be used by children once it has been applied.
the film may only be applied to furniture with a sufficient surface area. The film must not protrude beyond the furniture.
Our play foils may only be used under adult supervision and should be checked for any damage before use. The play furniture must NOT be used if parts are damaged.
If the film has been completely or partially removed and re-glued, the toy no longer fulfils the safety requirements due to altered adhesive properties and must be taken out of circulation.

Note

The wall to be covered must be dried or hardened for at least 3 weeks after a new coat. Our wall films are not suitable for latex paints, siliconised or Teflon-coated substrates.

Tip: To make things easier, carefully cut the individual stickers apart with scissors to make them easier to stick together

1. Remove the backing paper

Small pieces can be removed completely from the backing paper straight away. For large pieces of foil, please only peel off a strip of backing paper approx. 10 cm wide at the beginning. This will prevent the large adhesive surface from sticking to another adhesive surface and make it easier to apply. It is best to apply large areas together with a second person.

2. Play shop glue on

Start by gluing on one of the stilts. This is the easiest way to determine the right distance to the second stilt. To do this, stick the film to your wall and align it with a spirit level if necessary.

Now align the roof. This is best done together with a second person. A spirit level can also help you here to align the decal.
If bubbles appear or you have stuck, you can slowly and carefully peel off the film at a 45° angle and reposition it.

Then stick on the second pillar. Stick the personalised sign flush next to it. You can choose the height to suit your taste. The same applies to the menu bar and the pennants.

Removal instructions

We have the following tip for you for removing the film from the furniture: Heat the film with a hairdryer and peel it off carefully and slowly at a 45° angle. Please note that we have no information about the condition of the furniture or your wall. It can therefore not be ruled out that colours, wallpaper, paintwork or other surfaces may be damaged when the film is removed.

Do you have any questions?

Write to us!