Gluing instructions
decal for IKEA FLISAT dollhouse
Made in Germany
⚠️ ATTENTION!
- All wall/play films are suitable for children aged 3 and over and for indoor use only. If you do not apply the film immediately, please keep it out of the reach of children. It may only be used by children once it has been applied.
- The film may only be applied to furniture with a sufficient surface area. The film must not protrude beyond the furniture.
- If a corner of the film no longer adheres due to repeated peeling, the piece of furniture no longer fulfils the safety requirements and must be taken out of circulation.
- If the film is removed and reapplied to another wall or another piece of furniture, the piece of furniture no longer fulfils the safety requirements due to changes in the adhesive properties and must be removed from circulation .
Application instructions1
. Disassemble & clean dollhouse
Undothe two screws on the top and side of your doll's house. Make sure that the surfaces to be covered are clean and dry.
Cutting apart the foil parts
To make things easier, carefully cut the individual stickers apart with scissors to make them easier to stick.3. Remove the corner
First, carefully remove a corner of the film from the backing paper and align it with the appropriate backsplash.
4. Stick on the film
Now stick the film piece by piece onto the backsplash. There are a total of two back wall parts to laminate.
5. Dollhouse assemble
Then reassemble the dollhouse.
Note: Even if you want to stick on the DACHLA film, you must assemble the doll's house roof before attaching the decal to it. Otherwise you will not be able to fix the roof with the screws afterwards.
6. Fitting the DACHLA decal
To attach the DACHLA decal, you must first remove the chimney. Now stick the film onto the roof of the doll's house.
Then insert the screws through the film into the holes for the chimney and mount it.
