Gluing instructions
decal for IKEA LÄTT children's table
Made in Germany
⚠️ ATTENTION!
- All wall/play films are suitable for children aged 3 and over and for indoor use only. If you do not apply the film immediately, please keep it out of the reach of children. It may only be used by children once it has been applied.
- The film may only be applied to furniture with a sufficient surface area. The film must not protrude beyond the furniture.
- If a corner of the film no longer adheres due to repeated peeling, the piece of furniture no longer fulfils the safety requirements and must be taken out of circulation.
- If the film is removed and reapplied to another wall or another piece of furniture, the piece of furniture no longer fulfils the safety requirements due to changes in the adhesive properties and must be removed from circulation .
Mounting instructions
1. Disassemble & clean the table
If you have an already assembled LÄTT children's table, you should dismantle it before laminate. This will give you a clean result as the edges of the decal disappear under the table frame.
The table surface should be clean and free of dust and grease before laminate. Therefore, clean it thoroughly and then dry it with a cloth.
2. Remove the corner
First, carefully remove one corner of the film from the backing paper and align it with the table surface.
3. Stick on the film
Now hold the film at two corners and stick it slowly onto the surface to be covered. If bubbles appear or you have stuck yourself down, you can slowly and carefully remove the film at a 45° angle and reposition it.
.jpg "Ikea Lätt Klebefolie aufkleben")
.jpg "Ikea Lätt Klebefolie glatt streichen")
4. Assemble the table
You can now reassemble the table. To do this, carefully slide the glued table surface back into the table frame. Now assemble the table frame and tighten the screws.
.jpg "Ikea Lätt Tisch zusammenbauen")
